Bunny and Carrot
If you'd like to make a carrot of your own, then you will need...
Materials
-felt (for the leaves)
-fabric (for the carrot)
-some stuffing
-paper (to make a pattern)
Carrot Materials
Step 1: Cut the carrot out
First you need to make your pattern. Draw a carrot shape. Then add some seam allowance by tracing around it a bit larger (however much you want to make your seams). Then draw the leaves. They don't need seam allowance since they'll be made out of felt. This part really doesn't need to be that precise. Cut out your pattern and pin to your fabric or trace with a fabric marking pen and cut out. Cut out 2 matching carrot pieces and however many leaves you like. I cut 3 leaf pieces. Mine match, but there's no reason they need to be identical.
Carrot Pieces
Step 2: Pin and sew the carrot together
Pin the carrot right sides together with the leaves tucked inside. I always have the wrong instinct to have bits like the leaves sticking out, but then when you flip it, they'd be on the inside. So make sure your leaves are tucked in and be careful to keep all but the stem away from the edges so that you don't catch extra bits when sewing.
Pinning and Sewing the Carrot
Sew around the carrot, leaving a gap of at least an inch on one side for turning it right side out. I sewed back and forth over the leaves a few times to make sure all three were well secured.
Step 3: Flip and iron the carrot
Flip your carrot right side out and iron it flat, making sure to iron in the edges of the opening. This makes it easier to sew up later.
The Unstuffed Carrot
Step 4: Stuffing and finishing the carrot
The Stuffed Carrot
Now stuff in lots of filling. Sew up the gap using a ladder stitch.
Voila! The Finished Carrot Toy!
If you make a carrot toy following this tutorial, I'd love to see it! Please add your pictures to my flickr group.
The Finished Carrot
Photographs and artwork by Allison Gryski. © All rights reserved.
2 comments:
Very good tutorial. Thanks
i know this may sound stupid but do you have a pattern we can use? i tried cutting it out on my own and it ended up looking like a finger...
Post a Comment